The Elders' House of Pain

Public Forum => Counter-Strike---> Help => Topic started by: Larry Flint on January 08, 2005, 10:57:11 PM

Title: LAN Help
Post by: Larry Flint on January 08, 2005, 10:57:11 PM

alright i need help with my internet fellas, give me ever available peice of feedback possible


ok i just bought my new computer, i received it friday and have everything installed on it i just need a lil help with my internet.

ok i need to know how to run my internet from my modem to my moms computer to mine.

i have installed a d-link dfe-530tx+ on my moms computer, and my computer has a lan connection built in. now i hook my internet up regularly and then ran a cat 5 from my moms LAN card to mine(this does not work). what do i need to buy for this to work

my cable modem is a toshiba pcx2200

plz help

/pce

Title: LAN Help
Post by: NightTrain on January 09, 2005, 06:45:25 AM

I think you need a router dude.  Run the incoming line to the modem and the modem to a router and then wire each computer to the router.

Title: LAN Help
Post by: T3H on January 09, 2005, 02:25:15 PM

using a Cat5e cable then u run the  Cat5 to your ethernet card and boom ur done

Title: LAN Help
Post by: nemesis on January 09, 2005, 02:29:02 PM

You need a router to make it al work.
MAKE SURE YOU ROUTER HAS AT LEAST 4 PORTS

1. hook up cable modem to WAN of router with RJ-45 wire.
2. hook up RJ-45 wire from lan ports of router to both computers.
3. Sometimes you may need to reset cable modem to alow the change of mac address.

any questions please let me know

Title: LAN Help
Post by: Larry Flint on January 09, 2005, 03:24:02 PM

hey guys is 4:23 i finally got internet working i did jsut what nem said to do and bam i got internet so i am now up for some source

Title: Re: LAN Help
Post by: T3H on February 19, 2005, 08:05:32 AM

You need a router to make it al work.
MAKE SURE YOU ROUTER HAS AT LEAST 4 PORTS

1. hook up cable modem to WAN of router with Cat5 wire.
2. hook up Cat5 wire from lan ports of router to both computers.
3. Sometimes you may need to reset cable modem to alow the change of mac address.
4. It may go mess up every once in a while which u will need to unplug it and plug it back in.
5. Get A Dlink Router

Title: Re: LAN Help
Post by: Spikeroo on February 19, 2005, 06:08:31 PM

Quote from: T3H on February 19, 2005, 08:05:32 AM

You need a router to make it al work.
MAKE SURE YOU ROUTER HAS AT LEAST 4 PORTS

1. hook up cable modem to WAN of router with Cat5 wire.
2. hook up Cat5 wire from lan ports of router to both computers.
3. Sometimes you may need to reset cable modem to alow the change of mac address.
4. It may go mess up every once in a while which u will need to unplug it and plug it back in.
5. Get A Dlink Router

6. Don't forget to jam 5 CATs up Thug's ass.  Then reboot.
 :mrgreen: